Tube Fly Attachment

The Nebbe Articulating Bobbin Rest

The Nebbe articulating bobbin rest pictured below was the inspiration of Duncan Nebbe (ardent tyer, friend and jvice customer) who came up with the idea. This bobbin rest can be used in line just like the standard one but then can be easily and quickly swivelled to the side when access to the front of the fly is required.

The tube fly attachment screws onto the front of the GooseNeck vice. It has a collet clamping mechanism to lock the pin and the tube is then locked in place by turning the front cone. Available with 1.7mm pin for Salt Water and 1mm for freshwater fly's.

Gallows Attachment

The Gallows attachment shown above in green is used for tying Para loop Fly's. The attachment fully rotates with the head so no rotational features are lost when in use.  The design enables the Para loop hackle to be temporarily pulled back out of the way while thorax material is added.

Salt Water Streamer Attachment

The Saltwater Streamer attachment shown above in green is used when tying fly's like the Surf Candy. This accessory holds the tail material in place while tying and is especially useful to hold the tail in the desired shape while applying epoxy. 

The top spring clip can be swiveled out of the way, reducing clip pressure, to allow the fibers to be easily pulled into the clip during tying. 

Once the tail has been spread to the desired shape the top clip is swiveled into place securely holding the fibers while epoxy is applied.

The attachment rotates with the head making epoxy control and manipulation easy.

Flash Holder

The Flash Holder shown above consists of a vertical Anodised Aluminum post with brass knob to hold the stainless steel horizontal bar. This allows for quick release of the stainless arm when storing. Cable ties are used for securing material to the horizontal SS rod. (Flash not included)